Pioneer PDP-507XD manual Connecting control cords, About SR+, Presetting manufacture codes

12Enjoying through External Equipment

Connecting control cords

Connect control cords between the Plasma Television and other PIONEER equipment having the tlogo. You can then operate the connected equipment by sending commands from its remote control unit to the remote control sensor on the Plasma Television.

After the CONTROL IN terminals have been connected, the remote control sensors on the connected equipment do not accept commands from the remote control units. Face the remote control units to the remote control sensor on the Plasma Television when operating the connected equipment.

NOTE

•Make sure that the power is turned off when making connections.

•Complete all component connections before making control cord connections.

About SR+

The CONTROL OUT terminal on the rear of the Plasma Television supports SR+ that allows linked operations with a PIONEER AV receiver. SR+ presents functions such as the input switch linkage operation function and the DSP surround mode display function. For more information, see the instruction manual that came with the PIONEER AV receiver supporting SR+.

NOTE

•While in connection through SR+, the volume on this system is temporarily minimized.

•When making control cord connections, use the SR+ cable.

•When making control cord connections with one or more

pieces of Pioneer equipment, directly connect the Plasma Television and the Pioneer amplifier that supports SR+. Do not connect other equipment between them.

Plasma Television (rear view)

Controlling other equipment using the supplied remote control unit

Using the supplied remote control unit, you can control other equipment in connection: a set-top box (STB), DVD player, DVD/HDD recorder (DVR), or VCR.

Before using this function, you need to preset the supplied remote control unit with the manufacture code of the

equipment to be controlled. When you then want to control the equipment, press SELECT on the remote control unit to select

an appropriate mode depending on the equipment; the selection is switched among TV, STB, DVD/DVR, and VCR. The corresponding mode indicators on the remote control unit show the currently selected mode.

TV/DTV

P

SELECT	DVD/	SOURCE
	TV STB DVR VCR

Presetting manufacture codes

1Press SELECT on the remote control unit to select the STB, DVD/DVR, or VCR mode depending on the equipment.

2After confirming that the indicator of the previously selected mode goes off, press and hold SELECT, and then press 1 on the remote control unit.

•The corresponding mode indicator flashes.

3Press 0 to 9 to enter a 3-digit manufacture code.

•See the manufacture code list on page 65 to identify an appropriate code.

•The mode indicator lights up for approximately one second and then goes off; presetting the manufacture code is completed.

1 2 3

4 5 6

7 8 9

When SR+ is not used:

The control cables (commercially available) are mono sound cables with mini plugs (no resistance).

When SR+ is used:

Use the SR+ cable (available as option).

CONTROL IN

OUT

CONTROL IN

OUT

CONTROL IN

OUT

		INFO
PC	0
INPUT 5
	TV/DTV
P
SELECT TV	DVD/	SOURCE
	STB DVR VCR

64

En