Pioneer PDP-507XD Reducing video noise, Setting Child Lock, Selecting a decoder input terminal

08Basic Adjustment Settings

9Select “System” (/).

10Select a sound system (/).

•You can select from among “B/G”, “D/K”, “I”, “L”, and “L’”.

Manual Adjust

Programme Entry	1
Search	42.75MHz
System	B/G

11Select “Colour System” (/).

12Select a colour system (/).

•You can select from among “Auto”, “PAL”, “SECAM”, and “4.43NTSC”.

System	B/G
Colour System	Auto
Store	No

13Select “Store” (/).

14Select “Yes”, “Yes (Listed)”, or “No” (/).

	Colour System	Auto
	Store	Yes
	Tuner NR	On
Item		Description
Yes		You can select the channel using P +/P –.
Yes (Listed)		Select this option to register the channel as
		your favourite channel.
		You can select the channel using the Favourite
		Channel list and P +/P –.
No		You cannot select the channel using P +/P –.

•To set up for another channel, repeat steps 6 to 14. 15 Press HOME MENU to exit the menu.

NOTE

•The above procedure transfers and sets the selected channel information to the connected recording equipment such as a VCR or DVD/HDD recorder (DVR).

•Manual Adjust also allows you to make selections for “Tuner NR”, “Child Lock”, and “Decoder”. See “Reducing video noise”, “Setting Child Lock”, and “Selecting a decoder input terminal”.

Reducing video noise

For the individual channels, you can specify whether the Plasma Television should reduce video noise depending on the levels of broadcasting signals.

1Repeat steps 1 to 6 provided for “Using Manual Adjust”.

•After selecting a channel (using Programme Entry), perform the following steps.

2Select “Tuner NR” (/).

30

3Select “On” or “Off” (/).

Store	Yes
Tuner NR	On
Child Lock	View

4Press HOME MENU to exit the menu.

NOTE

•This function may not achieve a satisfactory result, depending on the conditions of broadcasting signals.

•When using a decoder with a decoder terminal selected, this function may fail to achieve a good result.

Setting Child Lock

Child Lock inhibits selected TV channels from being tuned and watched.

1Repeat steps 1 to 6 provided for “Using Manual Adjust”.

After selecting a channel (using Programme Entry), perform the following steps.

2Select “Child Lock” (/).

3Select “Block” (/).

Tuner NR	On
Child Lock	Block
Decoder	Off

•The selection is switched between “View” and “Block”. 4 Press HOME MENU to exit the menu.

Selecting a decoder input terminal

If you have connected a decoder, select a decoder input terminal (INPUT1).

1Repeat steps 1 to 6 provided for “Using Manual Adjust”.

After selecting a channel (using Programme Entry), do the following steps.

2Select “Decoder” (/).

3Select “INPUT 1” (/).

Tuner NR	On
Child Lock	Block
Decoder	INPUT1

4Press HOME MENU to exit the menu.

NOTE

•With “Off” (factory default) selected, you cannot watch any images from the decoder.

En