Pioneer PDP-507XD manual Listening to audio from the sub screen using headphones, Power Control

Basic Adjustment Settings 08

Listening to audio from the sub screen using headphones

With headphones connected, you can listen to audio coming from the sub screen when in the 2-screen or picture-in-picture mode; audio coming from the main screen is output from the speakers. To use this function, follow the procedure below.

1Press HOME MENU.

2Select “Sound” (/ then ENTER).

3Select “Headphone Output” (/).

4Select the desired parameter (/).

	Front Surround			Off
	Headphone Output		Main
	Sub Volume	15
Item		Description
Main		Audio coming from the main screen is output
(factory default)		from the PHONES output terminal.
Sub		When in the 2-screen or picture-in-picture mode,
		audio coming from the sub screen is output
		from the PHONES output terminal.

5Select “Sub Volume” (/).

6Select the desired volume level (/).

Front Surround		Off
Headphone Output		Sub
Sub Volume	15

7Press HOME MENU to exit the menu.

NOTE

•To adjust the volume for headphones after selecting “Sub”, always use the menu item (shown in the procedure) no matter whether the screen is in the single, 2-screen, or picture-in-picture mode. When the screen is in the single mode with “Sub” selected, audio coming from the screen is output from speakers even with headphones connected.

•Audio from a connected subwoofer is muted when you have selected “Sub” for “Headphone Output” and connected headphones.

Power Control

Power Control provides convenient functions for power saving.

Energy Save

You may use one of the three Energy Save modes to save power consumption.

1Press HOME MENU.

2Select “Power Control” (/ then ENTER).

3Select “Energy Save” (/ then ENTER).

4Select “Save 1”,”Save 2”, or “Picture Off” (/ then

ENTER).

Item	Description
Standard	Does not decrease the picture brightness.
Save1	Slightly lowers power consumption while
	slightly suppressing the brightness drop level.
Save2	Decreases the picture brightness and lowers
	power consumption.
Picture Off	Deactivates the screen to save power. To restore
	the screen display, press any button other than
	i+/i– and e.
	This setting is not memorized by the system.

5Press HOME MENU to exit the menu.

NOTE

•You can also select this function using the Home menu when the input source is a PC.

•When you change the Energy Save mode, you may notice a change in the panel sound. This is normal.

No Signal off (AV mode only)

The system will be automatically placed into the standby mode if no signal is received for 15 minutes.

1Press HOME MENU.

2Select “Power Control” (/ then ENTER).

3Select “No Signal off” (/ then ENTER).

4Select ”Enable” (/ then ENTER).

Item	Description
Disable	Does not place the system into the standby
(factory default)	mode.
Enable	Places the system into the standby mode if no
	signal is received for 15 minutes.

5Press HOME MENU to exit the menu.

NOTE

•Five minutes before the system is placed into the standby mode, a message appears every minute.

•The system may not be placed into the standby mode when noise signals are present at the Plasma Television after a TV programme finishes.

English

37

En