Pioneer PDP-507XD manual Screen Saver, Common Interface

Enjoying DTV broadcasts

Displaying technical information

Use this function to check the hardware/software version number.

1Repeat steps 1 to 4 provided for “Using Auto Update”.

2Select “Technical Information” (/ then ENTER).

NOTE

•You can select “DTV Setup” only when watching DTV channels.

Using MHEG application (UK only)

Some stations bring you programmes with the MHEG (Multimedia and Hypermedia Expert Group) application encoded, letting you experience DTV interactively.

When provided, the MHEG application will start when you press any of the colour buttons or m.

NOTE

•This function is not available when subtitle is activated (see page 39).

Screen Saver

The screen saver automatically starts when no operation is performed for 3 minutes while receiving DTV radio channels.

09

Installing a CA module and smart card

Common Interface slot is located at the rear of the Plasma	English
Television.
1 Hold and push the tab of the slot cover on the rear of the
Plasma Television leftward (a), and remove the cover while
pulling the tab’s latch downward (b).
Tab

a

b

2Insert the specified CA module containing a smart card into the Common Interface slot as far as it will go.

FACE

N INTER

COMMO

CA module

Smart card

NOTE

•While the screen saver is active, you can perform the following operations:

•Press TV/DTV to switch to analogue TV.

•Press any other button to switch to the normal radio channel screen.

•Programme Timer is active while the screen saver is displayed.

Common Interface

To receive scrambled DTV signals you will need a CA module and a smart card provided by the service provider.

Although CA module types may vary depending on the manufacturer, each one of the CA modules supports a certain kind of encryption system. Your Plasma Television supports CA modules which are made to work with the DVB standard. Contact a service provider for the right type of CA module.

Please note that a smart card may only be valid for a single service provider and due to this, a specific range of channels.

NOTE

•CA modules and smart cards are neither supplied nor optional accessories from PIONEER.

After inserting a card, leave it in the slot permanently. Do not remove it from the terminal unless asked to do so. For instance, your card has to be in the slot when your service provider wants to download new information to the smart card.

Displaying information about the installed CA module

If you have installed a CA module in the Common Interface slot, you can display information about the CA module.

1Press HOME MENU.

2Press “Setup” (/ then ENTER).

3Select “DTV Setup” (/ then ENTER).

4Select “DVB-CI Information” (/ then ENTER).

(If there is no CA module installed, the “DVB-CI Information” option is greyed out.)

45

En