Pioneer PDP-507XD manual Using i/o link.A

12Enjoying through External Equipment

NOTE

•If you select a parameter other than “Auto”, make such a setting that results in natural colour.

•If no image appears, specify another digital video signal type.

•For the digital video signal types to be specified, check the operation manual that came with the connected equipment.

To specify the type of audio signals:

When you use the INPUT 3 HDMI terminal, use the following procedure to specify the type of audio signals.

1Repeat steps 1 to 3 provided for “To activate the HDMI terminal.”

2Select “Audio” (/ then ENTER).

3Select the type of audio signals (/ then ENTER).

•If you select “Auto”, an attempt will be made to identify the type of audio signals when audio signals are received.

Item	Description
Auto	Automatically identifies input audio signals.
(factory default)
Digital	Accepts digital audio signals.
Analogue	Accepts analogue audio signals.

4Press HOME MENU to exit the menu.

NOTE

•The INPUT 4 HDMI terminal accepts only digital audio signals.

•If no sound is output, specify another audio signal type.

•For the audio signal types to be specified, check the operation manual that came with the connected equipment.

•Depending on the equipment to be connected, you also need to connect analogue audio cables.

To select the SCART terminal which is available for i/o link.A:

Select the INPUT terminal to which the recording equipment (e.g. VCR) you use has been connected.

1Press HOME MENU.

2Select “Setup” (/ then ENTER).

3Select “i/o link.A” (/ then ENTER).

4Select the desired parameter (/ then ENTER).

Item	Description
INPUT 2	INPUT 2 is available for i/o link.A.
(factory default)
INPUT 3	INPUT 3 is available for i/o link.A.

5Press HOME MENU to exit the menu.

NOTE

•The i/o link.A functions work only when the audiovisual equipment is connected to the INPUT 2 or 3 terminal on the Plasma Television with i/o link.A via a fully wired 21-pin

SCART.

•Refer to operation manuals of each external equipment for the details.

•If a SCART cable has been connected to the INPUT 3 terminal with the i/o link.A activated, input signals (other than Component) are automatically identified and displayed. If the i/o link.A has been deactivated, Video is always selected for signals other than RGB because the system cannot identify among RGB, Y/C (S-Video), and CVBS (Video) signals; for example, receiving Y/C (S-Video) signals results in monochrome display.

Plasma Television (rear view)

Using i/o link.A

The Plasma Television incorporates three typical i/o link.A functions for smooth connections between Plasma Television and other audiovisual equipment.

One Touch Play

While the Plasma Television is in standby mode, it automatically turns on and plays back images from the audiovisual source (e.g. VCR, DVD).

WYSIWYR (What You See Is What You Record)

When the remote control unit of the connected VCR has the WYSIWYR button, you can automatically start recording by pressing the WYSIWYR button.

Preset Download

Automatically transfers channel preset information from the tuner on the Plasma Television to the one on the connected audiovisual equipment (e.g. VCR) via the INPUT 2 or 3 terminal.

SCART cable (commercially available)

VCR or DVD/HDD

Recorder (DVR)

60

En