Pioneer PDP-507XD Selecting languages for audio, subtitles, and teletext, Using Software Update

09Enjoying DTV broadcasts

Selecting languages for audio, subtitles, and teletext

You may manually configure language settings for audio, subtitles, and teletext.

1Repeat steps 1 to 4 provided for “Selecting a digital audio format”.

2Select “Language Settings” (/ then ENTER).

3Select “Primary Audio”, “Secondary Audio”, “Primary Subtitle”, “Secondary Subtitle” or “Teletext” (/).

4Select a language (/).

NOTE

•The Plasma Television automatically selects the language based on the “Country” setting (page 29) when the selected language for audio, subtitle, or teletext is not available.

•You can select “DTV Setup” only when watching DTV channels.

Using Software Update

This function downloads and updates the system’s software at the specified timing.

Using Auto Update

With this function on, the Plasma Television checks if updated software is available and then downloads it (as necessary). After this, the system executes Add New Channels operation (page 40). This series of operations are automatically executed at the specified time.

1Press HOME MENU.

2Select “Setup” (/ then ENTER).

3Select “DTV Setup” (/ then ENTER).

4Select “Software Update” (/ then ENTER).

5Select “Auto Update” (/).

6Select “On” (/).

Software Update

Auto Update On

Set Update Time

Start Manual Update

Technical Information

44

NOTE

•We recommend that you normally select “On”.

•For Auto Update to start, there must be more than 1 hour left to the start of the next preset recording/watching.

•60 seconds before the scheduled update, a message prompt appears asking if you want to carry out Auto Update or not. Auto Update automatically starts if “OK” is selected or no selection is made after 50 seconds.

•To quit an update in progress, press HOME MENU.

•You can select “DTV Setup” only when watching DTV channels.

Setting Update Time

You can set the time your Plasma Television performs Auto Update each day. To use this function, set “Auto Update” to “On” first.

1Repeat steps 1 to 4 provided for “Using Auto Update”.

2Select “Set Update Time” (/ then ENTER).

3Set a time for Auto Update (/// or 0 to 9).

Set Update Time

Time

11 : 32

Starting Manual Update

This function allows you to manually execute Software Update. If less than 1 hour is left to the next scheduled Auto Update or programmed recording/watching, Manual Update cannot be executed.

1Repeat steps 1 to 4 provided for “Using Auto Update”.

2Select “Start Manual Update” (/ then ENTER).

NOTE

•For Manual Update to start, there must be more than 1 hour left to the start of the next preset recording/watching.

•For Manual Update to start, there must be more than 1 hour left to the start of Auto Update.

•You can select “DTV Setup” only when watching DTV channels.

En