Pioneer PDP-507XD Preparation, Installing the Plasma Television, Moving the Plasma Television

Preparation

Installing the Plasma Television

Over 50 cm

Over

10 cm

Location

•Avoid direct sunlight. Maintain adequate ventilation.

•Because the Plasma Television is heavy, be sure to have someone help you when moving it.

CAUTION

•If you do not leave sufficient space above the Plasma Television, it will not receive enough ventilation and will not operate properly.

NOTE

•Allow enough space around the upper and back parts when installing to ensure adequate ventilation of the rear of the unit.

Using the optional PIONEER stand

•For details on installation, refer to the instruction manual supplied with the stand.

Using the optional PIONEER speakers (for PDP-607XD and PDP-507XD)

•For details on installation, refer to the instruction manual supplied with the speaker.

CAUTION

Operating Environment

Operating environment temperature and humidity:

+0 °C to +40 °C (+32 °F to +104 °F); less than 85 % RH (cooling vents not blocked)

Do not install this unit in a poorly ventilated area, or in locations exposed to high humidity or direct sunlight (or strong artificial light).

Moving the Plasma Television

(for PDP-607XD and PDP-507XD)

Under speaker (PDP-607XD)

(PDP-507XD)

NOTE

•Do not use the speaker to support the weight of the Plasma Television.

•Always remove the speakers before moving the Plasma Television. Do not hold the Plasma Television by the speaker mounting fittings.

Side speaker

(PDP-607XD)

05

English

17

En