Pioneer PDP-507XD manual No Operation off AV mode only, Power Management PC mode only

08Basic Adjustment Settings

No Operation off (AV mode only)

The system will be automatically placed into the standby mode when no operation is performed for three hours.

1Press HOME MENU.

2Select “Power Control” (/ then ENTER).

3Select “No Operation off” (/ then ENTER).

4Select “Enable” (/ then ENTER).

Item	Description
Disable	Does not place the system into the standby
(factory default)	mode.
Enable	Places the system into the standby mode if no
	operation is performed for three hours.

5Press HOME MENU to exit the menu.

NOTE

•Five minutes before the system is placed into the standby mode, a message appears every minute.

Power Management (PC mode only)

The system will be automatically placed into the standby mode when no signal is received from the personal computer.

1Press HOME MENU.

2Select “Power Control” (/ then ENTER).

3Select “Power Management” (/ then ENTER).

4Select “Mode 1” or “Mode 2” (/ then ENTER).

Item	Description
Off	No power management
(factory default)
Mode1	• Places the system into the standby mode
	when no signal is received from the personal
	computer for eight minutes.
	• Even when you start using the computer and
	a signal is received again, the system stays
	off.
	• The system is switched on again by pressing
	STANDBY/ON on the Plasma Television or
	TV a on the remote control unit.
Mode2	• Places the system into the standby mode
	when no signal is received from the personal
	computer for eight seconds.
	• When you start using the computer and a
	signal is input again, the system is switched
	on.
	• The system is switched on again by pressing
	STANDBY/ON on the Plasma Television or
	TV a on the remote control unit.

5Press HOME MENU to exit the menu.

38

En