Basic Functions
Demonstration mode
The system has a demonstration mode that shows the various features offered by the system.
To activate the demonstration
●In standby mode, press and holdÇon the system until " WELCOME" is displayed.
➜ The demonstration will begin.
To deactivate the demonstration
●Press and holdÇon the system until "DEMO OFF" is displayed.
➜ The system will switch to standby mode.
Note:
–If you have not deactivated the demonstration, it will resume five seconds after the system switches to Eco Power standby or standby mode.
Switching the system on
In standby/demonstration mode
●Press STANDBY ON to switch on the last selected source.
●Press CD 1/2/3, TUNER or TAPE (TAPE 1/2).
●Press OPEN/CLOSE.
➜ The system will switch to CD mode.
In Eco Power standby mode
●Press ECO POWER to switch on the last selected source.
●Press CD 1/2/3, TUNER or TAPE 1/2 on the remote control.
Switching the system to standby mode
In demonstration mode
●Press and hold Ç on the system.
In any other source mode (except Eco Power standby mode)
●Press STANDBY ON (or B on the remote control).
➜ The clock will appear on the display when the system is in standby mode.
Switching the system to Eco Power standby mode (< 0.5 Watt)
●Press ECO POWER (or press and hold B on the remote control).
➜" ECO PWR" is displayed, then the display screen will go blank.
➜The low power ECO POWER LED will be lighted.
Dim mode
You can select the desired brightness for the display.
●In any source mode (except standby mode), press DIM MODE repeatedly to select : DIM 1, DIM 2, DIM 3 or DIM OFF.
➜ DIM is shown, except for DIM OFF mode.
DIM | Brightness | Spectrum |
mode |
| Analyser |
1 | normal | off |
|
|
|
2 | half | on |
|
|
|
3 | half | off |
|
|
|
OFF | normal | on |
|
|
|
Note:
–In standby mode, pressing DIM MODE to select half or full brightness for clock display.
English
13
