Radio Reception
To stop storing the automatic preset
●Press PROGRAM or Ç on the system.
Note:
– If no preset number is selected, automatic preset will begin from preset (1) and all your former presets will be overridden.
Manual Preset Programming
1Tune to your desired radio station (refer to “Tuning to radio stations”).
2Press PROGRAM.
➜PROG starts flashing.
➜The next available preset number is displayed for selection.
To store the radio station to another preset number
●Press í or ë to select the desired preset number.
3Press PROGRAM again to store the radio station.
➜ PROG disappears.
●Repeat steps
To exit manual preset mode
●Press Ç on the system.
Notes:
–If you attempt to store more than 40 preset radio stations, "FULL" is displayed.
–During programming, if no key is pressed within 20 seconds, the system will exit the programme mode automatically.
Erasing a preset radio station
1Press í or ë to select the preset radio station to be erased.
2Press and hold Çon the system until “PRESET DELETED” is displayed.
➜The deleted radio frequency remains on the display.
➜The preset numbers of all other preset radio stations in the band with higher numbers are also decreased by one.
●Repeat steps
For Recording, please refer to “Tape Operation/Recording”.
English
Tuning to preset radio stations
●Once you’ve programmed the radio stations, press í or ë to select the desired preset
number.
➜ The preset number, radio frequency, and waveband are displayed.
19