Pioneer PDP-507XD manual Selecting an input signal type, Colour system setting AV mode only

Useful Adjustment Settings 11

Selecting an input signal type

After connecting to the INPUT 1, INPUT 2, or INPUT 3 terminal, specify the type of video signals to be received from the connected equipment. For the type of the signals, see the operation manual that came with the connected equipment.

Before starting the menu, press INPUT 1, INPUT 2, or INPUT 3 on the remote control unit or press INPUT on the Plasma

Television to select an input source.

1Press HOME MENU.

2Select “Option” (/ then ENTER).

3Select “Input Select” (/ then ENTER).

4Select a signal type (/ then ENTER).

Input Select

Video

S-Video

RGB

COMPONENT

•For INPUT1, you can select “Video” or “RGB”.

•For INPUT2, you can select “Video”, “S-Video” or “COMPONENT”.

•For INPUT3, you can select “Video”, “S-Video”, or “RGB”. 5 Press HOME MENU to exit the menu.

NOTE

•If no image appears or images appear in inappropriate colours, specify another video signal type.

•For the signal types to be specified, check the operation manual that came with the connected equipment.

Colour system setting (AV mode only)

If an image does not appear clearly, select another colour system (e.g., PAL, NTSC).

1Press HOME MENU.

2Select “Option” (/ then ENTER).

3Select “Colour System” (/ then ENTER).

4Select a video signal system (/ then ENTER).

Colour System

Auto

PAL SECAM NTSC 4.43NTSC

•You can select “Auto”, “PAL”, “SECAM”, “NTSC”, or “4.43NTSC”.

•With “Auto” selected, input signals are automatically identified.

5Press HOME MENU to exit the menu.

NOTE

•The factory default is “Auto”.

•You need to perform colour system setting for each of INPUT 1, 2, 3, and 5.

•For the colour system setting, see steps 11 and 12 under “Using Manual Adjust” (page 29).

English

53

En