INSTALLATION TIPS
INSTALLATION TIPS
Select Your Installation Type
GOOD INSTALLATION:
Horizontal Installation
(Direct Vent - Outside Wall)
No natural draft. Wind
pressures may affect operation
BETTER INSTALLATION:
Vertical & Horizontal Installation
(Up and Out)
Some natural draft aids venting. Wind pressures may still affect operation
BEST INSTALLATION:
Vertical Installation
(Straight Up)
Natural draft improves operation and
negative effects from wind
VENTING TYPE
a:
b:Stainless Steel flex liner may be used inside existing flue or chimney (woodstove replacement applications)
CAUTION: Do not use Type
REQUIRES 3”
DIAMETER STANDARD
With listed termination kit. If
installation requires in excess of 11’ of pipe, it is recommended a 4” diameter pipe be used.
MANUFACTURED
HOME
Requires outside air for com- bustion. Use a galvanized or stainless steel pipe for duct. Minimum duct size
CLEARANCES TO
COMBUSTIBLES
Ensure all clearances are main- tained in accordance to instruc- tions contained on product safety label and in compliance with pipe/venting requirements.
PLEASE REVIEW THIS ENTIRE
INSTALLATION AND OPERA- TION MANUAL FOR ADDITIONAL
INSTRUCTIONS.
POWER SUPPLY
Must have proper polarity and be grounded.
Note: Use of an extension cord may adversely effect the performance of your unit.
Seal all
Venting Joints:
Use RTV
(high temp silicone)