Up to * 6” (153 mm)
Rear
6” |
| 6” |
(153 mm) | Top View | (153 mm) |
min. |
| min. |
Front
Floor Protector
6” (153 mm) min.
*Note: When installed at clearances less than 6”, the floor protection is only required to extend to the wall.
Figure 1 - Floor Protection Requirements
CLEARANCES
Standard residential or manufactured home installation. These appliances require the following minimum clearances to combustibles:
Minimum Clearances To Combustibles
Montage 32FS | Horizontal Flue – | Interior Vertical |
| Directly Through Wall | Flue |
A - Side wall to unit | u 4” (102 mm) | u 4” (102 mm) |
B - Back wall to unit | 2” (51 mm) | 9” (229 mm) |
|
|
|
C - Side wall to unit Corner | 1” (25 mm) | 1” (25 mm) |
|
|
|
D - Max. Depth of Alcove | v 24” (610 mm) | v 24” (610 mm) |
|
|
|
E - Flue to Wall | 3” (77 mm) | 3” (77 mm) |
|
|
|
u Measured to fuel hopper lid in alcove.
v Minimum Alcove Measurements - Height 48” (1220 mm) x Width 31” (788 mm) x Maximum Depth 24” (610 mm)
Table 1 - Minimum Clearances To Combustibles
|
| Rear Wall or Alcove |
| |
|
|
| Combustible |
|
|
| B | E |
|
D | Combustible |
|
| Combustible |
| A | A | ||
|
|
| ||
Figure 2 |
|
|
| |
|
|
| Corner |
|
|
|
| Combustible |
|
|
| E | C |
|
|
| C |
|
|
| Combustible |
|
|
|
Figure 3
IMPORTANT
•Minimum clearances specified may not allow for ease of operation and maintenance (please take this in to account when planning the instal- lation). If installed to the minimum clearances, removal of the appliance may be necessary for servicing.
•Recommended clearance zone from the front of the appliance to combustibles is 4 feet mini- mum.
•Clearances to combustibles for the appliance can only be reduced by means approved by the regulatory authority.
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE
