Lennox Hearth SPECIFICATIONS - Montage 32FS, Dimensions shown are approximations only

SPECIFICATIONS - Montage™ 32FS

Product Reference Information

Cat. No.	Model	Ship.	Ship.
		Weight	Volume
H6839	Montage 32FS	285 lb.	22.06 cu. ft.

Flue Size	3” (76 mm) Rear
Floor Protection	Front and Sides: 6”(152 mm)
Requirements	Back: Up to 6”(152 mm) u
Hopper Capacity	55 Lbs. v
Burn time	15 - 37 hours v
Fuse, Control Board	5 Amp, 250 volt, 3AGw
Fuse, Igniter	6 Amp, 125 volt w
Heat Input	13,000 - 32,000 BTU/hrv
(BTU’s per hour)
Emissions	< 4.5 gr/hr (varies w/size and
	type of fuel) EPA Certified v
Convection (room air)
Blower	150 CFM; 1.5 Amps,
	175 rpm
Combustion Blower	95 CFM: 1.0 Amps,
	3000 rpm
Auger Motor	1.25 RPM; 0.5 Amps
Standard Features	Fastfire™ Self Igniter
	Wall Thermostat
	(wire included)

24-11/16”

627mm

9-3/16” 233mm

9-5/8”

245mm

5-7/8"

Clean-Out

Tee

Stove Back

28-11/16”

729mm

1-9/16” 40mm

Notes:

•Dimensions shown are approximations only

.25(+/- 1/4”)

•Approved for Manufactured Home Installations.

•Optional Kits Available - Decorative trim kits, log set, window screen and 4” Quick Disconnect kits.

•The burn grate is designed with advanced UltraGrate™ technology.

uNon-combustible floor protection is required (see Floor Protection, Page 4). When installed at clearances less than 6”, the floor protector is only required to extend to the wall.

vFuel delivery and burn times will vary depending on size and type of fuel used. Estimated heat input based on fuel value of 8400 BTU per lb.

wFuses are rated as fast blow.

22-1/2” 572mm

2-15/16”

75mm

2”

51mm

7”11-1/4”

178mm286mm

23-1/8” 507mm

11-1/4” 286mm

5-1/2”

140mm

26

NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE