Installation
2.5Technical Specifications
Standards Compliance | IEEE 802.3u |
Speed | Up to 200 Mbps on physical layer |
AC Plug Type | US, EU, UK and AUS |
LED Status Lights | VPI, ETH |
Interface | 10/100BaseT Fast Ethernet, Powerline |
Frequency Range used | 2 – 34 MHz |
Power Input | 85 to 265 V AC, 50/60 Hz |
Dimensions | 132 mm L x 60 mm W x 65 mm H |
Transmitted Power spectral density | |
Power Consumption | 5W |
Safety & EMI | UL/EN 60950, FCC Part 15, EN 55022 |
| EMC limits |
10
2.6Connecting the Wall Mount Adapter
To connect the Corinex AV200 Powerline Ethernet Wall Mount F to your computer, follow the steps listed below.
1.Once the security configuration and synchronization have been completed the adapters may be unplugged and taken to the respective places in the home where the computers will be connected to them.
2.Connect the supplied Ethernet cable to the Ethernet (LAN) port on the wall mount, and to an Ethernet port on your computer.
3.Plug the Corinex AV200 Powerline Ethernet Wall Mount F unit directly into any standard electrical outlet.
Note: The Corinex AV200 Powerline Ethernet Wall Mount F should be plugged directly into a wall outlet, not into a power strip or surge suppressor. Power strips and surge suppressors can weaken or block the Powerline network signal.
