Network Configuration
When to use this filter:
•When you want to isolate a Powerline test network from the rest of the electrical grid, either because you don’t want the Powerline signal from the test network to go out and disrupt other adapters, or because you want to isolate this network from the noise, or other traffic, in the rest of the electrical grid. This setup is illustrated in the picture below.
Powerline Domain
Corinex AV200 Powerline Wall Mount F | Corinex AV200 Powerline Wall Mount F |
| Power Strip |
No Noise on this side |
|
No Powerline signal on this side | Prefilter |
Corinex | Powerline |
Noise | |
Filter | |
•When you want to isolate the electrical noise produced by some household appliance, because this noise falls in the PLC band and disrupts the signal from the adapters. This setup is illustrated in the picture below.
Noisy Appliance
43
Corinex AV200 Powerline Wall Mount F
Corinex AV200 Powerline Wall Mount F
CorinexPow |
|
NoiseFilter | erline |
Powerline Communication
