
Adapter Configuration
If you want to configure the wall mount adapter to function as an automatic EP/AP, please select “EP” from the list. If you want the adapter to behave as a Master, select “Fixed AP” from the list. After selecting one, click “OK” to confirm your choice.
Note: Fixed AP is available only when a Network ID is set on the adapter (please read below for details on Network Identifiers).
The AV200 technology supports multiple networks on a single circuit. The networks | 19 |
are differentiated by Network Identifiers, which can be set in this section. The |
|
Network Identifier is a string of characters (Network Identifier field) which simply |
|
acts as a name for the network. This Network ID must be identical for all adapters |
|
on a network. Adapters with different Network IDs will not be able to communicate |
|
with each other. |
|
|
|
Note: Please refer to section 4.2 for more information about the network |
|
types and their Network Identifiers. |
|
|
|
If the Network Identifier field is left blank, the default, publicly available network is |
|
configured, and the adapter can communicate with all other adapters with empty |
|
Network Identifier fields. When you enter a Network ID, a private network is |
|
configured. |
|
|
|
Note: The Network Identifier string can have up to 20 ASCII characters. |
|
Quote and |
|
characters are not recommended |
|
|
|