Corinex Global GameNet manual Functional Description, Installation LED Definitions, Vpi, Eth

Installation

LED Definitions

LEDs from top to bottom)

1. VPI

Displays the quality of the powerline link when the adapter is synchronized with another adapter on the same network.

2. ETH

Displays the presence of an Ethernet link and activity on the link.

Blinking: receiving/transmitting data

Connector Definitions (Connectors from left to right)

1.LAN: 1x RJ-45 LAN10/100 Ethernet port

7

2.4Functional Description

2.4.1 Standby Button

By default, when plugged in, the adapter is in the ON state. When Standby operation is desired, the button should be pressed and released at once. This will set the adapter in energy-saving Standby operation mode. When the adapter is in Standby operation, the button can be pressed to set the adapter back into the ON mode.

2.4.2 SYNC/ RST Buttton

2.4.2.1 One-button Security Setup (OBUS)

By default, powerline adapters come without a network identifier and without an encryption key. As a result, when they are plugged in, a new Powerline network will be created (referred to as a public network).

Corinex GameNet