To change the language setting
You can change the on-screen displays to show messages in a specified language.
Select [Setup] [ General Settings] [Language Setting] a desired language.
To turn off the power
Close the LCD screen.
To adjust the angle of the LCD screen
First open the LCD panel 90 degrees to the camcorder ( ), and then adjust the angle ( ).
Notes
The recording date, time and condition are recorded automatically on the recording media. They
are not displayed during recording. However, you can check them as [Data Code] during playback.
To display them, select [Setup] [ Playback Settings] [Data Code]
[Date/Time].
Related topics
To set the date and time again: [Date & Time Setting]
To calibrate the touch panel: [ Calibration (HDR-CX200/CX210/PJ200)]
Back to top
Copyright 2012 Sony Corporation
40