"Handycam" User Guide

Operation Search

Before use

Getting started

Recording

Playback

Saving images with an external device

Customizing your camcorder Troubleshooting Maintenance and precautions

Contents list

Search

Print

 

 

Top page > Troubleshooting > Troubleshooting > Playback on the TV

Playback on the TV

Neither image nor sound is played on the connected TV.

Images are not output from the HDMI OUT jack, if copyright protection signals are recorded in the images.

The top, bottom, right, and left edges of images are trimmed slightly on a connected TV.

The LCD screen of your camcorder can display recording images across the entire screen (full pixel display). However, this may cause slight trimming of the top, bottom, right, and left edges of images when played back on a TV which is not compatible with full pixel display.

It is recommended you record images using the outer frame of [Guide Frame] as a guide. [Details]

The image appears distorted on the 4:3 TV.

This happens when viewing an image recorded in the 16:9 (wide) mode on a 4:3 TV. Set [TV Type] correctly and play back the image. [Details]

Black bands appear at the top and bottom of the screen of the 4:3 TV.

This happens when viewing an image recorded in the 16:9 (wide) mode on a 4:3 TV. This is not a malfunction.

The images being played back do not appear on the LCD screen when you connect the camcorder to a TV and play back images.

Highlight Playback or a scenario will not appear on the LCD screen of the camcorder while it is connected to a TV and play back images.

Back to top

Copyright 2012 Sony Corporation

169

Page 169
Image 169
Sony PJ200 Playback on the TV, Neither image nor sound is played on the connected TV, Image appears distorted on the 43 TV