"Handycam" User Guide PrintSearch
Operation Search
Before use
Getting started
Recording
Playback
Saving images with an external
device
Customizing your camcorder
Troubleshooting
Maintenance and precautions
Contents list
Top page > Getting started > Charging the battery pack > Charging the battery using the AC Adaptor
Charging the battery using the AC Adaptor
Charging time
To remove the battery pack
To use a wall outlet (wall socket) as a power source
Notes on the battery pack
Notes on the AC Adaptor
1. Close the LCD screen and attach the battery pack ( ).
2. Connect the AC Adaptor ( ) and the power cord (mains lead) ( ) to your camcorder and the
wall outlet (wall socket) ( ).
A: Align the mark on the DC plug ( ) with that of DC IN jack ( ).
The CHG (charge) lamp ( ) turns on.
The CHG (charge) lamp turns off when the battery pack is fully charged. Disconnect the AC
Adaptor from the DC IN jack of your camcorder.
Notes
You cannot attach any “InfoLITHIUM” battery pack other than the V series to your camcorder.
33