Charging time
Approximate time (min.) required when you fully charge a fully discharged battery pack.
Battery pack | AC Adaptor |
115 | |
|
|
155 | |
|
|
| 195 |
|
|
390 | |
|
|
The charging times shown in the table above are measured when charging the camcorder at a temperature of 25 °C (77 °F). It is recommended that you charge the battery in a temperature range of 10 °C to 30 °C (50 °F to 86 °F).
To remove the battery pack
Close the LCD screen. Slide the BATT (battery) release lever (
) and remove the battery pack (
).
To use a wall outlet (wall socket) as a power source
Make the same connections as those for charging the battery pack.
Even if the battery pack is attached, the battery pack is not discharged.
Notes on the battery pack
When you remove the battery pack or disconnect the AC Adaptor, turn the camcorder off and make
sure that the (Movie)/ (Photo) lamps, the access lamp are turned off. The CHG (charge) lamp flashes during charging under the following conditions.
The battery pack is not attached correctly. The battery pack is damaged.
The temperature of the battery pack is low.
Remove the battery pack from your camcorder and put it in a warm place. The temperature of the battery pack is high.
Remove the battery pack from your camcorder and put it in a cool place.
In the default setting, the power turns off automatically if you leave your camcorder without any operation for about 2 minutes, to save battery power ([Eco Mode]).
Notes on the AC Adaptor
Use the nearby wall outlet (wall socket) when using the AC Adaptor. Disconnect the AC Adaptor from the wall outlet (wall socket) immediately if any malfunction occurs while using your camcorder.
Do not use the AC Adaptor placed in a narrow space, such as between a wall and furniture.
Do not
Disconnect the AC Adaptor from the camcorder, holding both the camcorder and the DC plug.
Related topics
Expected time of recording and playback with each battery pack
34
