S-74 MPa Single Feeder Features
Posifeed™ Wire Drive Assembly Features
(Synergic Pulsed MIG when connected to the Invision 350 MPa)
24 VDC high-torque, permanent-magnet motor.
Quick-change drive rolls.
Quick-release, calibrated drive-roll pressure adjustment arm allows drive roll change without losing spring preload setting.
Four sealed ball bearing all-gear-driven drive-roll carriers for smooth, positive and accurate wire feed with long uninterrupted service life.
Easy loading and threading of welding wire without having to release the drive-roll pressure arm.
Solid-state speed control and brake circuit eliminates the need for electrical/ mechanical relays and increases service life.
Uses Miller standard 1-5/8 in (41 mm) diameter drive rolls.
Quick-connect for all Miller guns.
Covered drive rolls — easy access, heavy-duty, molded composite cover over drive assembly.
Floating positive drive systems provide trouble-free feeding on a variety of wires.
Tool-less rotatable drive assembly allows operator to rotate the drive housing, eliminating severe bends in the wire feed path which reduce gun liner life. Also aids in feeding difficult wires.
Dual tension control adds flexibility for the operator to fine-tune the pressure on the wire independently when feeding a variety of wires.
Specifications (Subject to change without notice.)
(Use with CV Power Sources.)
Input Power | Electrode Wire Diameter Capacity | Wire Speed | Dimensions | Net Weight |
| | | | | |
24 VAC, 10 A, 50/60 Hz | .023 –5/64 in (0.6 – 2 mm) | 50 | –780 IPM (1.3 –19.8 m/min) | H: 14 in (356 mm) | 58 lb (26 kg) |
| | Optional High Speed Motor: | W: 12 in (305 mm) | |
| | 90 | –1440 IPM (2.3 – 36.6 m/min) | D: 26-1/2 in (673 mm) | |
| | | | | |
Control Panel
1
2
3
4
S-74 MPa
24V Wire Feeder
1.Voltage Display Meter
2.Wire Speed Display Meter
3.Wire Feed Speed Select
54. Trigger Hold
5.Voltage Select
6.Jog/Purge
6
