Limiter, Contour, Volume, Tone Controls

The YORKVILLE BASS MASTER 200T has been designed with the needs of professional bass guitar players in mind.We believe you will find your YORKVILLE BASS MASTER 200T to be dependable and versatile for years to come.

Limiter

The LIMITER prevents audible power amplifier clipping. Just before clipping occurs the signal is reduced to prevent audible clipping. The LIMITER allows clear playing at higher output levels.

Contour

The CONTOUR control produces a unique sound alternative. The CONTOUR attenuates the midrange and boosts a band of high frequencies.

Volume

Set the VOLUME control for the level of sound desired.

Tone Controls

Each TONE CONTROL permits a wide range of adjustment. The four overlapping controls cover the entire audio band.

Effects Send / Return

The signal at the EFFECTS SEND jack normally feeds the power amplifier. The EFFECTS RETURN jack, when used, disconnects the original signal going to the amplifier. Together the two jacks form the effects loop.

Balanced Line

The BALanced LINE OUT signal is post-effects. Electronic circuitry minimizes the possibility of hum when the amplifier is connected to an external device.

Phones

When a headphone plug is inserted into the PHONES jack, both speaker and EXTENSION SPEAKER OUTPUT jack are disconnected.

Power

The LED beside the POWER switch will light when the unit is on.

Extension Speaker Output

An external EXTENSION SPEAKER can be connected via the EXTENSION SPEAKER OUTPUT jack on the back panel. The minimum impedance of the external speaker load is 4 Ohms. The output jack is wired parallel with the internal speaker so that the internal speaker will continue to operate when an extension cabinet is used. The power amplifier is electronically and thermally protected against unsafe loads.

Specifications

POWER	• 184W, 2 Ohm load,
	5%THD, 1kHz
	• 150W, 4 Ohm load,
SENSITIVITY	5%THD, 1kHz
SENSITIVITY	0dB <25mVrms
EFFECTS RETURN	<1Vrms
HUM AND NOISE	> -90dB below maximum
	output voltage, unweighted
	-94dB typical
	Measurement made with
	GAIN and VOLUME at 5
DC OFFSET	(CONTOUR and EQ OFF).
DC OFFSET	<25mV
SPEAKER	2 x 10 inch • 4-Ohms Total
	Leson Tweeter

200T specifications

Yorkville Sound is a renowned name in the audio equipment industry, known for producing high-quality audio solutions for various applications. Among their impressive lineup is the Yorkville Sound 200T, a powerful and versatile speaker that has gained recognition for its performance in live sound and installation settings.

The Yorkville Sound 200T is a compact two-way speaker system designed to deliver high-quality sound reproduction in a lightweight and easily portable package. It features a robust two-way design, integrating a high-efficiency 200-watt RMS amplifier with a high-frequency compression driver and a carefully designed woofer. This combination allows for clear, crisp highs and a strong, deep bass response, making it suitable for a variety of musical genres and settings.

One of the standout features of the 200T is its excellent dispersion characteristics. The speaker is designed to provide a wide coverage area, ensuring that audio is evenly distributed throughout the listening environment. This makes it a popular choice for both small venues and larger events, as it can fill the space with sound without requiring excessive volume levels. The speaker also incorporates a molded polycarbonate cabinet, which not only enhances durability but also minimizes unwanted resonance, resulting in a cleaner sound.

The 200T is equipped with innovative technologies that contribute to its overall performance. With a built-in crossover network, the speaker effectively separates high and low frequencies, allowing each driver to perform at its best. Furthermore, the inclusion of a high-frequency protection circuit helps prevent damage to the compression driver, ensuring longevity and reliability during extended use.

The speaker's versatility is enhanced by its multiple input options, allowing it to be paired with various audio sources, from mixing consoles to playback devices. Additionally, its lightweight design makes it easy to transport, whether for a mobile DJ gig, a band rehearsal, or installation in a fixed venue.

In conclusion, Yorkville Sound's 200T speaker stands out as an exceptional solution for anyone seeking a reliable, high-performance sound system. Its combination of advanced technologies, durable construction, and versatile application makes it a favorite among audio professionals and enthusiasts alike, delivering powerful sound with clarity and precision. Whether for stage performance or sound reinforcement, the 200T continues to be a valuable asset in the world of live audio.

Yorkville Sound 200T manual Limiter, Contour, Volume, Tone Controls, Effects Send / Return, Phones

Models: 200T