Panasonic KX-TVP200 installation manual External Message Delivery, Auto Forwarding

C3 SETTING COS (CLASS OF SERVICE) PARAMETERS

External Message Delivery

25.a) The current setting plays. Press [1] to change the setting (enable or disable). If the External Message Delivery is enabled, set the prompt mode for receiving External Delivery Messages (go to Step 25b below).

b)The current prompt mode plays. Press [1], [2], [3], or [4] to choose the desired mode.

•[1] System Prompt

•[2] User 1 Prompt

•[3] User 2 Prompt

•[4] Selective Prompt

c)Confirm the entry is correct and Press [5] to accept it. Return to Step 25a above.

Auto Forwarding

26.a) The current setting plays. Press [1] to change the setting (enable or disable). If Auto Forwarding is enabled, go to Step 26b below.

b)The current forwarding destination mailbox number plays. Press [1] to change the mailbox number.

c)Type the mailbox number.

d)Confirm the entry is correct and Press [2] to accept it.

e)The current delay time is played. Press [1] to change the setting. The delay time is the period of time that the VPS must wait before forwarding messages. For example, enter 115# to set the delay time to 1 h 15 min; 30# to set 30 min.

f)Confirm the entry is correct and Press [2] to accept it.

g)The current forwarding mode is played. Press [1] to change the setting (copy or move).

h)Confirm the entry is correct and Press [2] to accept it. Return to Step 26a above.

Installation Manual 283