5.5 SETTING MAILBOXES

Table 5-8

Parameter

Value Range

Description/Function

 

(Default)

 

 

 

 

Dial Number

Up to 32 digits

Assigns a telephone or beeper (pager) number to

 

consisting of 1-9,

Device 1, 2, or 3. The subscriber can also specify the

 

0, , #

dial number from his telephone.

 

P, T, M, X

P: Pause

 

(None)

T: Dial Tone Detection

 

 

 

 

M: Dial Mode Switching Code (Touchtone to Pulse, or

 

 

Pulse to Touchtone)

 

 

X: Callback Number Entry Code

 

 

1-9, 0, , #: Dial Codes

 

 

Note: The callback number entry code "X" must be

 

 

included in the number to be called if the Beeper

 

 

Callback No. Entry Mode is enabled through COS and

 

 

"Type of Device" is set to "Beeper". The proper number

 

 

of "Pauses" must be inserted before the callback entry

 

 

code.

 

 

 

Type of Device

1. Telephone

Specifies the device to receive notification. This is

 

2. Beeper

automatically set to "Beeper" when "X" is used in the

 

Dial Number (above). The subscriber can also specify

 

(Telephone)

 

 

the type of device from his telephone.

 

 

 

Use Mode

1. Not Use

Specifies how Device 1, 2, or 3 is to be used. The

 

2. Continuously

subscriber can also specify the use mode from his

 

3. Scheduled

telephone.

 

(Continuously)

 

 

 

1. Not Use—Device 1, 2, or 3 is not used for a

 

 

notification call.

 

 

2. Continuously—Device 1, 2, or 3 is called whenever

 

 

a message is recorded in the mailbox.

 

 

3. Scheduled—Device 1, 2, or 3 is called on a schedule

 

 

basis when a message has been left in the mailbox.

 

 

 

No. of Retries

0-4 times

Specifies the number of times that a notification call to

 

(0)

Device 1, 2, or 3 should be attempted after a busy or no

 

 

answer condition is received.

 

 

 

Busy Delay

2-120 min

Specifies the time (in minutes) the VPS must wait after

Time

(3)

a busy condition is received before making another

 

 

notification call to Device 1, 2, or 3.

 

 

 

No Answer

2-120 min

Specifies the time (in minutes) the VPS must wait after

Delay Time

(30)

a no-answer condition is received before making

 

 

another notification call to Device 1, 2, or 3.

 

 

 

132 Installation Manual

Page 132
Image 132
Panasonic KX-TVP200 installation manual Parameter Value Range Description/Function Default, Telephone, Continuously