Panasonic KX-TVP200 Starting the Quick Setup, PBX Type Required Procedures, Screen output

5.1 STARTING UP

Table 5-1

PBX Type			Required Procedures
KX-T308/T616	1	2	3	4	5	6	7	8
KX-T1232/TA series/	1	3	4	5	6	7	8
T336/T96
Non-Panasonic System	1	3	4	5	6	7	8
KX-TD816/1232/500/612	1	4	5	6	8

5.1.3 Starting the Quick Setup

The sequence must be followed through to the end to take effect. If you press "\", you will have to start over. Quick setup may be performed again without erasing prior data.

Note

Depending on PBX extension numbering, the mailbox numbers might be 2- to 5- digits long.

At the System Administration Top Menu, Type [5] and Press ENTER, or Type [3] then QSET and Press ENTER. See 7.2.17 Quick Setup (QSET) for more information.

Screen output:
System Administration Top Menu	5
or
System Administration Top Menu	3	QSET

Quick Setup Utility for connection to Panasonic KX-T series telephone systems

This utility provides a quick way of programming the Voice Processing System to operate in a standard automated attendant or voice mail configuration when connected to a Panasonic KX-T series telephone system. The system will prompt you to enter, modify or confirm settings based upon which PBX type you select.

By entering the appropriate information in the following screens, the system sets PBX integration parameters, identifies the extension numbers connected to it, creates default mailboxes, sets its ports to handle callers with automated attendant or voice mail service, sets system passwords and sets the time and date. Finally, it confirms that you want to activate the system based on the information you entered, modified or confirmed.

To proceed, press Enter. To exit and cancel Quick Setup now, press \ .

1.PBX Type

a)Press ENTER.

Installation Manual

107