Panasonic KX-TVP200 installation manual Assign Extension Group No. for the port

4.2 KX-TD500 PROGRAMMING FOR DIGITAL INTEGRATION

Screen output:

4.Assignment of the extension ports connected to the VPS

a)Continue the programming in the "1-4 VPS (DPT) Port Assignment" screen.

b)Select the extension port number of the card (DLC/DHLC) to which the VPS (DPT) jack is to be connected in the "Port No." menu.

Notes:

•You can assign a maximum of 6 jacks (12 ports) with the KX-TD500.

•This menu is displayed only when the attribute of the ports is assigned to "VPS (DPT)" in step 2.

•This programme tells the KX-TD500 which extension ports are connected to the VPS. This allows the KX-TD500 to send the proper Digital Integration information to these ports.

•Jack No.1 must be assigned, because its port is used as the channel to control the VPS.

c)Assign "DN" for the port (click "DN Refer" to check the available directory numbers).

Note:

This programme allows you to assign an extension number to each Voice Mail port. Since each port connected to the VPS provides two extensions, this enables you to assign extension numbers to each port. To reach the Voice Mail system, users dial these extension numbers.

d)Assign "Extension Group No." for the port.

Note:

Specify the extension group number (126 or 127 by default) to which VM or AA is assigned. Group numbers 1 to 128 are available to the VPS through additional programming.

(Selecting VM has the same effect as selecting AA, regardless of how the VPS is programmed.)

Installation Manual

81