Panasonic KX-TVP200 installation manual Enter 126 or, Press Store, Enter 127 or

4.3 CONNECTING THE VPS WITH THE PANASONIC KX-TD816, KX-TD1232 AND KX-TD612

c)Enter the system number ([0] or [1], master/slave). The system displays the ROM version and the date it was created.

This version must be the required version for DPT Integration to be utilised (both systems if system connection is used).

2.Set the date and time using System Programme [000].

3.Set PBX extension numbering using System Programme [003].

4.Assign the Voice Mail Port. This programme tells the PBX which jack will be connected to the VPS. This allows the PBX to send the proper DPT Integration information to those ports.

Notes

•You can assign a maximum of 6 jacks (12 ports) with the KX-TD1232 or KX- TD816.

•If you are configuring a 2-cabinet system, all Voice Mail Ports should be assigned to either the Master or Slave System.

From the SYS-PGM NO ? screen:

a)Enter [126] or [117].

b)Press the NEXT button (SP-PHONE). Screen output: M: # # #

c)Enter the jack number (02-64)of the port you will use for the Voice Mail.

d)Press STORE.

e)Press END (HOLD) when finished.

Conditions: Jack 01 cannot be used as a Voice Mail port. A jack programmed as a Manager Extension (System Programme [006]) cannot be used in this programme.

5.Skip this step unless setting flexible numbering.

System Programme [127] or [118] (Voice Mail Extension Number Assignment) is automatically set. This programme allows you to assign an extension number to each Voice Mail port. Since a jack connected to the VPS provides 2 extensions, this enables you to assign extension numbers to each port. You can assign any extension number that is not already assigned to another port. To reach the VPS, users dial these extension numbers. It is not necessary to change the default programming for the extensions 265 and 266 (or 165 and 166).

From the SYS-PGM NO ? screen:

a)Enter [127] or [118].

b)Press the NEXT button (SP-PHONE). Screen output: VM NO?

c)Press the NEXT button (SP-PHONE). Screen output: VM-01:#_ _ -1: 265 (or 165)

( _ _ = the port number you entered in programme 126 [or 117])

d)Enter the Extension Number that you want this port to have.

(The default extension number for port 1: 265 [or 165]; port 2: 266 [or 166])

e)Press STORE.

Installation Manual

87