Panasonic KX-TVP200 installation manual Set Time Time, Type 1 or, Type TIME, then Press Return

7.2UTILITY COMMANDS

3.To create a password or change an existing password:

a)Type [1] or [2]

Maximum 10 characters

NEW PASSWORD : =

Note

When you press [2] to change the System Reset/Clear password, you should type the current (OLD) password before entering a new one.

b)Type the password.

VERIFICATION: =

c)Type the password again for verification.

4.To clear a password:

a)Type [1] or [2].

Maximum 10 characters

NEW PASSWORD : =

b)Press ENTER. Do not type a password on this screen.

VERIFICATION : =

c)Press ENTER. Do not type a password on this screen.

Note

The password entered on the screen will not appear. The VPS does not distinguish capitals from lower cases.

7.2.4 Set Time (TIME)

Use the TIME command to set the system date and time. A number of system functions require that the system time and date be set correctly. These functions include message waiting notification, external message delivery, call-retries-after initial-failure-to-connect, and automatic deletion of messages.

Time Synchronisation: If you have DPT Integration between the VPS and your PBX (latest software version), the date and time are automatically sent from the PBX to the VPS whenever the PBX sets the date and time. Also, this transfer occurs whenever DPT Integration is established.

1.Type TIME, then Press RETURN.

$ TIME

Current time is 12:34, PM

Enter new time (HH:MM, AM/PM) : =

2.Type the current time.

Current date is MON 1-JAN-2001

Enter new date (DD-MM-YY) : =

150 Installation Manual