Panasonic KX-TVP200 Message Waiting Lamp Retry Times MWL, Setting Minimum Recording Length MRL

7.2 UTILITY COMMANDS

$ CCLR 20

Custom Menu <20> Access Counter Cleared !!

Note

Type CCLR 0 to clear the access counters of all Custom Services.

7.2.13 Message Waiting Lamp Retry Times (MWL)

Use the MWL command to specify the number of times the VPS will attempt to turn on the Message Waiting Lamp of the called extension. Apply this setting when a PBX other than the Panasonic KX-T series telephone system is used.

$ MWL

Current Setting of M.W.L. Retry Count is 3 Enter M.W.L. Retry Count (1-3) =

Note

This setting is not valid if "Message Waiting Lamp for Every Message" is set to "Yes".

7.2.14 Setting Minimum Recording Length (MRL)

Use the MRL command to specify the minimum message recording length (0-3 s). Messages shorter than the specified minimum recording length are discarded from the mailbox.

Note

The minimum recording length can only be set using this command.

1.Type MRL, then Press RETURN.

$ MRL

Current Setting of Minimum Recording Length is 2 Enter Minimum Recording Length (0-3) =

2.Type the message length.

7.2.15Modified Prompt List (MPLT)

Use the MPLT command to display the user prompt recording status: recorded, not recorded, or turned off.

1.Type MPLT, then Press RETURN. MPLT —> both prompts MPLT 1 —> User 1 prompts MPLT 2 —> User 2 prompts

158 Installation Manual