Panasonic KX-TVP200 installation manual Other Parameters-External Message Delivery, None

B6 SYSTEM ADMINISTRATION—SYSTEM PARAMETER SETTINGS

Table B-30

Parameter	Value Range	Description/Function
	(Default)
System	Up to 32 digits	Specifies a telephone number that will display on the
Callback No.	(None)	subscriber’s beeper (pager) as a callback number. The
		callback number entry mode "X" must be included in the
		telephone number.
		Note: If "Beeper Callback No. Entry Mode" is enabled
		through COS, the callback number entered by the caller
		will display on the destination beeper (pager). However,
		if the caller fails to enter a callback number, the System
		Callback No. will display instead.

Other Parameters-External Message Delivery

Controls the handling of External Message Delivery calls.

To access the proper menu for External Message Delivery, follow the menu path as shown:

System Administration Top Menu-1-5-7-4

Table B-31

Parameter	Value Range	Description/Function
	(Default)
Retry Times	0-4 times	Specifies the number of times to attempt an external
	(3)	message delivery call when the destination is busy or if
		there is no answer.
Busy Delay	2-60 min	Specifies the length of time in minutes the VPS must wait
	(3)	after a busy condition is received before trying to deliver
		the message again.
No Answer	2-120 min	Specifies the length of time in minutes the VPS is to wait
Delay	(60)	after a no answer condition is received before trying to
		deliver the message again.
Outgoing Call	Port No.	Specifies the port numbers used for the External Message
Ports	(1-12)	Delivery feature.
Message	1-6 min	Specifies the allowable message length of external
Length	(3)	delivery messages that the subscriber can record.
Max.	1-100 msgs	Specifies the maximum number of external delivery
Messages for	(3)	messages that can be stored in 1 mailbox.
Mailboxes

258 Installation Manual