Panasonic KX-TVP200 installation manual Remote Call Forward to CO, Continuously

B2 SYSTEM ADMINISTRATION—MAILBOXES

Table B-5

Parameter	Value Range	Description/Function
	(Default)
Use Mode	1. Not Use	Specifies how Device 1, 2, or 3 is to be used. The
	2. Continuously	subscriber can also specify the use mode from his
	3. Scheduled	telephone.
	(Continuously)
		1. Not Use—Device 1, 2, or 3 is not used for a
		notification call.
		2. Continuously—Device 1, 2, or 3 is called whenever
		a message is recorded in the mailbox.
		3. Scheduled—Device 1, 2, or 3 is called on a schedule
		basis when a message has been left in the mailbox.
No. of Retries	0-4 times	Specifies the number of times that a notification call to
	(0)	Device 1, 2, or 3 should be attempted after a busy or no
		answer condition is received.
Busy Delay	2-120 min	Specifies the time (in minutes) the VPS must wait after
Time	(3)	a busy condition is received before making another
		notification call to Device 1, 2, or 3.
No Answer	2-120 min	Specifies the time (in minutes) the VPS must wait after
Delay Time	(30)	a no-answer condition is received before making
		another notification call to Device 1, 2, or 3.
Time Frame 1,	1-12: h	Specifies the daily schedule for Message Waiting
2	00-59: min	Notification service for all days of the week.
MON:
	AM/PM:
TUE:		Note: These parameters are active only when "Use
	a.m./p.m.
WED:		Mode" is set to "Scheduled".
THU:	: All Day
FRI:	Space: No Use
SAT:
	(No Use)
SUN:

Remote Call Forward to CO

Follow the procedure below to specify the destination outside telephone number(s) to which the callers are forwarded when the Remote Call Forwarding feature is set to an outside (CO) line.

Telephone number 1 and Telephone number 2 can be specified per mailbox.

•Class of Service programming determines if the mailbox owner is able to use this feature.

•This feature is only available with DPT Integration.

Installation Manual

213