Panasonic KX-TVP200 installation manual Dnd, Inband Integration PBX Interface Parameters

B7 SYSTEM ADMINISTRATION—HARDWARE SETTINGS

Table B-43

Parameter	Value Range	Description/Function
	(Default)
Ringback	(1)	Indicates "Ringback Tone". Sent to the VPS when the
		extension dialled is ringing.
Busy	(2)	Indicates "Busy Tone". Sent to the VPS when the
		extension dialled is busy.
Reorder		Indicates "Reorder Tone". Sent to the VPS when an
	(3)	invalid extension number is dialled or when inadvertently
		connected to another VPS.
DND	(4)	Indicates "Do Not Disturb Tone". Sent to the VPS if the
		dialled extension has the Do Not Disturb feature enabled.
Answer	(5)	Sent to the VPS when the called extension answers the
		call.
Forward to VM		Sent to the VPS if the called extension is forwarded to a
Ringing	(6)	voice mail port and that voice mail port is available to
		accept the call.
Forward to VM		Sent to the VPS if the called extension is forwarded to a
Busy	(7)	voice mail port and that voice mail port is not available to
		accept the call.
Forward to		Sent to the VPS if the called extension is forwarded to
Other	(8)	another, non-Voice Mail extension.
Extension
Confirmation	(9)	Sent to the VPS when it successfully dialled a Message
		Waiting Lamp On or Message Waiting Lamp Off Code.
Disconnect	(#9)	Sent to the VPS when the other party goes "on-hook".

Note

	Default values in the above table vary depending on the settings of "PBX type" and
	"Inband Integration" (PBX Interface Parameters).
Table B-44
						KX-T series
		Other
Parameter					T1232/				TD816/
		Manufacturers
			T308	T616			T96	T336	1232	TD500
					TA series
									TD612
Ringback		N/A	N/A	N/A	1		A1	A1	1	1
Busy		N/A	N/A	N/A	2		B1	B1	2	2
Reorder		N/A	N/A	N/A	3		B2	B2	3	3
DND		N/A	N/A	N/A	4		B3	B3	4	4
Answer		N/A	N/A	N/A	5		A2	A2	5	5
Forward to VM		N/A	N/A	N/A	6		C1	C1	6	6
Ringing

270 Installation Manual