Panasonic KX-TVP200 installation manual 0030, Move

B3 SYSTEM ADMINISTRATION—SETTING COS (CLASS OF SERVICE) PARAMETERS

Table B-7

Parameter		Value Range	Description/Function
		(Default)
Authorization	1.	Yes	If set to "Yes", subscribers are able to utilise the External
for External	2.	No	Message Delivery feature. The sub-parameter to be set
Message		(No)	is Prompt Mode. If set to "No", sub-parameter cannot be
Delivery			assigned.
Prompt Mode	1.	System	When an external message is delivered, the receiver will
	2.	User 1	be greeted by the VPS in the specified language
	3.	User 2	(prompt). However, if "Selective" is enabled, then the
	4.	Selective	receiver has a choice of prompts. See related
		(User 1)	explanation in "Incoming Call Service Prompt" in Table
			5-5in 5.3.1 Port Service Menu.
			Note: When "Selective" is enabled and the receiver uses
			a rotary telephone, the no-entry selection is specified by
			"Prompt for Rotary Callers" in Table 5-5in 5.3.1 Port
			Service Menu.
Authorization	1.	Yes	If set to "Yes", the VPS automatically forwards
for Auto	2.	No	messages that have not been accessed for a specific
Forwarding		(No)	length of time to another mailbox. The sub-parameters to
			be set for this feature include Mailbox Number, Delay
			Time, and Forwarding Mode. If set to "No", sub-
			parameters cannot be assigned.
Mailbox		2-5 digits	Specifies the mailbox to which the messages will be
Number		(None)	forwarded.
			Note: The numbers of the System Group Distribution
			List cannot be specified as the destination.
Delay Time		(h) (min)	Specifies the length of time in hours and minutes that the
	00:05 to 99:59		VPS must wait before forwarding unretrieved messages.
		(00:30)	The maximum delay time is 99 h, 59 min.
			Note: The delay time must be less than the New
			Message Retention Time, or else messages will be
			deleted before being forwarded.
Forwarding	1.	Copy	Specifies if forwarded messages are to be retained in the
Mode	2.	Move	original mailbox. When set to "Copy", copies of the
		(Move)	messages are retained in the original mailbox after
			forwarding. When set to "Move", messages are
			forwarded to the receiving mailbox and are not retained
			at the original location.

Installation Manual 221