Panasonic KX-TVP200 installation manual On Line MODE** is displayed, Ascii Terminal

4.2 KX-TD500 PROGRAMMING FOR DIGITAL INTEGRATION

Table 4-2

Cause	Remedy
The PBX is not programmed properly to support	Do required integration
DPT Integration.	programming as described in
	this chapter.

10.Start up completed.

a)The Power Indicator light stops blinking when the start-up has been successful. (The delay varies according to the system’s condition.)

b)"**ON LINE MODE**" is displayed.

c)System prompt [>] is displayed on the screen. To enter system administration, Press ENTER. All parameters can be set through the menu-driven programme.

When the System Administrator starts operation, the system asks for the terminal type. By choosing VT100 [2], all parameters can be set through the menu-driven programme.

Please Select Your Terminal Type.

1.ASCII TERMINAL

2.VT100

Please Enter the Number := ______

Please Enter the Number:= [2]

Select [2] because Quick Setup is only available when using a personal computer that can emulate a VT100 terminal.

11.Go to the System Administration Top Menu. Select [5] and Press ENTER, or Type [3] then QSET and Press ENTER for Quick Setup and follow the Auto Configuration Instructions.

TEST: Press the INTERCOM button and then [2065]. If the VPS answers, you have a DPT connection.

Set the Rotary Switch to position 0 after initialisation is complete.

84

Installation Manual