Panasonic KX-TVP200 installation manual Button Assignment via PC Programming

4.4COMMON DPT INTEGRATION FEATURES AND SETUP PROCEDURES

6.To exit the Station Programming mode, Press the PROGRAM button or lift the handset.

7.Repeat these steps for each telephone.

Conditions: This button must be a CO or DSS/BLF key to be

programmed as a TWT button. When all Voice Mail ports are busy and this key is pressed, the user will hear reorder tone.

4.4.11Voice Mail Transfer Button Assignment via Station Programming

This feature allows an extension user to transfer calls directly to a Voice Mailbox. This is available with both DPT and Inband Integrations.

PC programming is also possible.

1.Enter PITS Programming:

a.With the phone on-hook, Press the PROGRAM button.

b.Dial [99]. (Display changes to PT-PGM Mode.)

2.Press the desired Flexible (CO or DSS/BLF) key that you want to assign as the VTR button.

3.Dial [82] or [8]. Screen output: VTR

4.Dial the Voice Mail extension number. Screen output: VTR- _ _ _

(_ _ _ = The extension number you entered).

5.Press STORE.

6.To exit the Station Programming mode, Press the PROGRAM button or lift the handset.

7.Repeat these steps for each telephone.

Conditions: This button must be a CO or DSS/BLF key to be programmed as a VTR button. When all Voice Mail ports are busy and this key is pressed, the user will hear reorder tone.

4.4.12 Button Assignment via PC Programming

The KX-TD500 users can assign buttons via PC programming. Follow the procedure below to assign each button.

Note

The KX-TD500 is not sold in the United Kingdom. It is only available in some countries.

1.Go to "4-2 Extension Line 1/2" screen (refer to the screen image in 4.4.6 Live Call Screening Assignment via PC Programming).

2.Select the "Card No." and "Port No." which you are going to program.

3.Click "CO Key" in the upper right corner. "Flexible CO Key" screen (for all CO Keys) displays.

Installation Manual

101