The RR 4200 stethoset receiver is an optional accessory for your RS 4200 stethoset receiver system. For details on the use of the RS 4200, please refer to the operating instructions.
Specifications:
System
Modulation | FM stereo |
Carrier frequencies | 863.3 MHz / 864.0 MHz / 864.7 MHz |
Range |
|
up to 100 m in the open | |
AF frequency response |
|
50 | |
THD |
|
< 1 % | |
Receiver |
|
| |
Max. SPL |
|
125 dB (SPL) | |
Power supply |
|
via BA 300 | |
| (3.7 V / 150 mAh) |
Operating time |
|
approx. 9 hrs | |
Weight |
|
approx. 50 g | |
Dimensions |
|
approx. 200 x 135 x 20 mm | |
|
|
CE Declaration of Conformity
This equipment is in compliance with the essential requirements and other relevant provisions of Directive 89/336/EC. The declaration is available on the internet site at www.sennheiser.com.
Before putting the device into operation, please observe the respective
Frequency range
A, B, CH, CY, CZ, D, DK, E, EST, F, FIN, FL, GB, GR, H, I, IRL, IS, L, LT, LV, M, N, NL, P, PL, S, SK, SLO
Batteries or rechargeable batteries
The supplied batteries or rechargeable batteries can be recycled. Please dispose of them as special waste or return them to your spe- cialist dealer.
WEEE Declaration
Your Sennheiser product was manufactured with
tes that electrical and electronic equipment – at the end of its operational lifetime – must be disposed of separately from normal
waste, e.g. at your local collection point or recycling centre.