Lucent Technologies 4.1 manual To create a Forced Account Code List, Account code in memory

■Wildcard Characters. You can use wildcard characters in list entries. For example, your company’s Sales Department has a three digit account code—the first digit represents the department and the second and third digit represent the individuals in the department. You enter 4!! as the list entry.

–The following entries are valid:

401

410

499

455555

–The following entries are invalid:

4

44

Programming

To create a Forced Account Code List:

1 .

Press [ Feature ] [

0

] [

0

] [ System Program ] [ System Program ] [

#

] [

4

] [

0

] [

9

].

2 .

Select a list entry (01–99). For example, to select the third entry, press [ 0 ] [ 3 ].

A display similar to the following appears:

Forced Act Code List 03

Data------

3 .

Enter up to six digits for the list entry.

4 .

If the account code is five digits or less, you must press [ Enter ] to save the

account code in memory.

5 . At this point:

■ To enter other account codes, press [ Next Item ] to select a different list

entry and repeat Steps 3 and 4.

■ To change the account code you just entered, press [ Remove ] and repeat

Steps 3 and 4.

■ To delete the account code you just entered, press [ Remove ].

6 .

Select another procedure or exit programming mode.

Forced Account Code List (#409) 5-93