Lucent Technologies 4.1 manual System Programming Quick Reference

System Programming Quick Reference

Place the Programming Overlay on the dialpad of the system display phone at extension 10 or 11

TO START SYSTEM PROGRAMMING

PRESS [ Feature ] [ 0 ] [ 0 ]

PRESS [ System Program ]

PRESS [ System Program ]

TO END SYSTEM PROGRAMMING

PRESS [ Feature ] [ 0 ] [ 0 ]

TO USE A SPECIFIC PROCEDURE

DIAL [ # ] and three-digit procedure code

Example: [ # ] [ 1 ] [ 0 ] [ 1 ] for System Date

TO CYCLE THROUGH SYSTEM	TO CYCLE THROUGH
PROGRAMMING PROCEDURES	AVAILABLE SETTINGS
PRESS [ Next Procedure ] or [ Prev Procedure ]	PRESS [	Next Data	] or [	Prev Data	]
	TO RETURN TO FACTORY
NOTES: Procedures #399, #609,
and #728—shown below in dashed	SETTING
boxes—are skipped when cycling.	PRESS [ Remove ]

System

SYSTEM DATE (p. 5-178)

DIAL #101

DIAL the date in MMDDYY form

SYSTEM DAY			(p. 5-179)
DIAL #102
DIAL 1 = Sunday ✔ 5			= Thursday
2	= Monday	6	= Friday
3	= Tuesday	7	= Saturday
4	= Wednesday
SYSTEM TIME			(p. 5-185)

DIAL #103

DIAL the time in HHMM 24-hour military format

NUMBER OF LINES (p. 5-143)

*See IMPORTANT below DIAL #104

DIAL two digits (01–24) for the number of outside lines to be assigned to every extension

✔2 per 206 or 200 module

✔4 per 400 module

TRANSFER RETURN RINGS

DIAL #105 (p. 5-194)

DIAL one digit (0–9) for the number of rings before the call returns

✔= 4 rings

0 rings = no return

RECALL TIMER DURATION

AUTOMATIC SYSTEM ANSWER BUTTON

DIAL #111		(p. 5-21)
DIAL 1	= Assigned
2	= Not Assigned ✔
3 = Select Button then press
	a programmable button
DIRECT EXTENSION DIAL DELAY
DIAL #112		(p. 5-62)

DIAL a ring delay number (0–9)

✔= 2 rings

DIRECT EXTENSION DIAL BUTTON

DIAL #113 (p. 5-59)

DIAL 1 = Assigned

2 = Not Assigned ✔

3 = Select Button then press

	a programmable button
OUTGOING CALL RESTRICTION
BUTTON	(p. 5-146)

DIAL #114

DIAL 1 = Assigned

2 = Not Assigned ✔

3 = Select Button then press a programmable button

WAKE UP SERVICE BUTTON

DIAL #115 (p. 5-204)

DIAL 1 = Assigned

2 = Not Assigned ✔

3 = Select Button then press

a programmable button

	Lines
DIAL MODE	(p. 5-58)

DIAL #201

DIAL a line number (01–24)

DIAL 1 = Touch-Tone ✔

2 = Rotary

PRESS [ Next Item ] to program another

line

HOLD DISCONNECT TIME

DIAL #203 (p. 5-106)

DIAL a line number (01–24) DIAL 1 = Long (450 msec) ✔

2 = Short (50 msec) PRESS [ Next Item ] to program another

	line
AUTOMATIC SYSTEM ANSWER
LINES	(p. 5-25)

DIAL #204

DIAL a line number (01–24) DIAL 1 = Assigned

2 = Not Assigned ✔ PRESS [ Next Item ] to program another

line

DIRECT EXTENSION DIAL LINES

DIAL	#205	(p. 5-63)
DIAL	a line number (01–24)

DIAL 1 = Assigned

2 = Not Assigned ✔

PRESS [ Next Item ] to program another line

GROUP CALL DISTRIBUTION

DIAL #206			(p. 5-94)
DIAL	a group number
	(1–6, 7 for VMS)
DIAL	a line number (01–24)
DIAL	1	= Assigned
	2	= Not Assigned ✔

3 = VMS Line Cover (only for hunt group 7)

PRESS [ Next Item ] to program another

line

POOL LINE ASSIGNMENT

DIAL #207 (p. 5-157)

DIAL a line number (01–24)

DIAL 1 = No Pool

2 = Main Pool 880 ✔

3 = Pool 881

4 = Pool 882

5 = Pool 883 PRESS [ Next Item ] to program

another line

LINE COVERAGE EXTENSION

DIAL #208 (p. 5-122)

DIAL a line number (01–24)

DIAL an extension number (10–57)

PRESS [ Next Item ] to program another line

PRESS [ Remove ] to unassign

ownership

DIAL #107 (p. 5-162)

DIAL two digits (01–80) to set the length of a switchhook flash

✔= 18 (450 msec)

ROTARY DIALING TIMEOUT

DIAL #108		(p. 5-164)
DIAL	1 = 4 sec	3 = 12 sec
	2 = 8 sec ✔
OUTSIDE CONFERENCE DENIAL
DIAL #109		(p. 5-148)
DIAL	1 = Allowed ✔
	2 = Disallowed
AUTOMATIC SYSTEM ANSWER
DELAY
DIAL #110		(p. 5-24)

DIAL a ring delay number (0–9)

✔= 2 rings

CALL COVERAGE RINGS
DIAL #116	(p. 5-40)

DIAL one digit (1–9) for the number of rings before the call is sent to the covering extension

✔= 2 rings

VMS COVER RINGS (p. 5-197)

DIAL #117

DIAL one digit (1–9) for the number of rings before the call is sent to the voice messaging system

✔= 3 rings

RING ON TRANSFER (p. 5-163)

DIAL #119

DIAL 1 = Active ✔

2 = Not Active

AUTOMATIC SYSTEM ANSWER MODE

DIAL #121 (p. 5-27)

DIAL 1 = Hold ✔

2 = Disconnect

3 = Ring

Procedures #207, #313, #314 and #315—shown in square dotted boxes— are not available when the system is configured for Key mode.

IMPORTANT: In Key mode, the Number of Lines procedure changes Line Assignment (#301), Line Access Restriction (#302), Automatic Line Selection, and Line Ringing to factory settings. To change line assignments without affecting other settings, use Line Assignment (#301).

In Hybrid mode, the Number of Lines procedure changes Pool Line Assign- ment (#207), Pool Extension Assignment (#314), and Pool Access Restriction (#315) for existing pools back to factory settings. Additionally, it changes Line Assignment (#301), Line Access Restriction (#302), Automatic Line Selection, and Line Ringing for individual lines back to factory settings. To change pool assignments without affecting other settings, use Pool Line Assignment (#207) and Pool Extension Assignment (#314).

For Centralized Telephone Programming, see previous pages