Message Light Off (F10XX)
Description
This feature turns off the message light at a specified extension (where XX is an extension number from
Related Features
For instructions on turning on the message light, see Message Light On.
Considerations
■This feature turns off the message light on system phones and standard phones that have message lights. (See “Standard Telephones” in Chapter 1 for a list of standard phones with message lights.)
■For message waiting capability, standard phones with message waiting lights must be connected to an R3.1 or later 206 module and the system must be equipped with an R3.1 or later primary processor module.
■Do not use this feature for an extension that is covered by the voice messaging system. The voice messaging system automatically turns off the message light at a subscriber’s extension when messages in the mailbox have been deleted.
If a message light is inadvertently turned off at an extension that has a message in the mailbox, the message light is refreshed during the voice messaging system’s daily maintenance (3 a.m.).
■If you use the Message Light On feature to signal someone at a doorphone extension, you must use this feature to turn off the light.
■You can program a Message Light Off button on a system phone to turn the message light off at a specific extension with one touch.
Programming
To program a Message Light Off button:
1.Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ Central Tel Program ].
2.Enter the number of the extension to be programmed with this feature.
3.Press a programmable button.
4.Press [ Feature ] [ 1 ] [ 0 ].
5.Optionally, dial the
destination, or skip to Step 6 if you want only the feature code on the button.
6.Program another button for this extension or exit programming mode.
