Using
System Phone
1.Set up the call to the first party. (You can call the party, pick up the call from hold, or answer an incoming call.)
You are connected with the first party.
2.Press [ Conf ].
The first party is now on hold.
3 . Set up the call to the second party.
You are connected with the second party. If you are adding an inside party to a call, you must wait until the party answers.
If you are active on a call using a pool button and you want to set up a conference call using one of the other lines in that pool, you can press
[ Intercom ] and dial the pool’s access code to gain access to another line in that pool.
4 . Press [ Conf ] again to add the second party to the call. You can now speak with the first and second parties.
5.Repeat Steps 2 through 4 to add one or two more parties.
Standard Phone
1.Set up the call to the first party. (You can call the party, pick up the call from hold, or answer an incoming call.)
You are connected with the first party.
2.Press the switchhook down once rapidly.
The first party is now on hold. You hear intercom dial tone.
3.To add an outside party, dial [ 9 ] or a pool access code plus the outside number. If the number is busy or does not answer, hang up and the first party rings back.
To add an inside party, dial the
4.When the second party answers, press the switchhook down once rapidly. You are now connected with both parties.
5.Repeat Steps 2 through 4 to add one or two more parties.
Conference Calls
