Lucent Technologies 4.1 manual 123

Programming

To change the Line Coverage setting for an extension:

1.Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 2 ] [ 0 ] [ 8 ].

2.Enter the desired line number. For example, to program line 24, press [ 2 ] [ 4 ].

3.Enter the number of the extension to be assigned ownership of the line.

4.At this point:

■To delete the current setting, press [ Remove ].

■To program another line, press [ Next Item ] or [ Prev Item ] until the line number shows on the display. Then repeat Step 3.

5.Select another procedure or exit programming mode.

Line Coverage Extension (#208) 5-123