Lucent Technologies 4.1 manual To assign a name to an extension

Programming

To assign a name to an extension:

1.Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ Central Tel Program ].

2.Enter the number of the extension to be programmed. For example, to

program extension 12, press [ 1 ] [ 2 ].

3.Press left [ Intercom ]. For extension 12, a display similar to the following appears:

12 Enter Extension Name

If a name was assigned previously to this extension, that name displays instead.

4.Enter the two-digit code for each character you want to enter. (See Table 5-1

for codes.) For example, to enter the name Andy, press [ 2 ][ 1 ] [ 6 ][ 2 ] [ 3 ][ 1 ] [ 9 ][ 3 ]. A display similar to the following appears:

12 ANDY

5.If you make a mistake, you can press [ Mic/HFAI ] to clear the display. Repeat Step 4 to enter the correct name.

6.Program a button for this extension or exit programming mode.

5-86Extension Name Display