Lucent Technologies 4.1 manual Rotary Dialing Timeout #108

Rotary Dialing Timeout (#108)

Description

This System Programming procedure changes the length of the Rotary Dialing Timeout. You may need to change the length of the timeout if you have any rotary lines and you are having trouble calling out on standard touch-tone phones. For example, if users dial slowly and calls are not completed or are connected to wrong numbers, lengthen the timeout.

Related Features

Use this procedure only if the Dial Mode (#201) for at least one outside line in the system is set to rotary.

Considerations

Do not change this setting unless the system is experiencing problems.

Valid Entries

1 = 4 seconds

2 = 8 seconds ✔

3 = 12 seconds

Programming

To change the length of the Rotary Dialing Timeout:

1.Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 1 ] [ 0 ] [ 8 ].

2.Press [ Next Data ] until the appropriate value displays.

3.Select another procedure or exit programming mode.

5-164Rotary Dialing Timeout (#108)