Lucent Technologies 4.1 manual Examples, Toll Call Prefix required, Toll Call Prefix not required

1800

Examples

The examples below show how to enter telephone numbers for an Allowed Phone Number List in Step 4 of “Programming.” When an Allowed List is assigned to an extension, users can dial numbers on that list, even if the numbers would otherwise be restricted.

■Specific Telephone Numbers. Enter the phone number exactly as you would dial it. For example, to allow calls to the number 201 555-1111, make the following entries:

–Toll Call Prefix required

12015551111

—Toll Call Prefix not required

2015551111

■All Telephone Numbers in One Area Code. The following list entries allow calls to the 800 area code:

– Toll Call Prefix required

–Toll Call Prefix not required

800

Programming

To create a list of Allowed Phone Numbers:

1 .	Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 4 ] [ 0 ] [ 7 ].
2 .	At the List Number: prompt, enter a list number (1–4). For exampIe, to
	select list 1, press [ 1 ].
3 .	At the Entry: prompt, select a list entry (01–1 0). For example, to select the
	first entry, press [ 0 ] [ 1 ].
4 .	At the Data------------	prompt, enter the first telephone number.
5 .	To save the telephone number in memory, you must press [ Enter ].
6 .	At this point:
	■ To change the phone number you just entered, press [ Remove ] and
	repeat Steps 4 and 5.
	■ To delete the phone number you just entered, press [ Remove ].
	■ To enter other phone numbers in this list, press [ Next Item ] and repeat
	Steps 4 and 5.
	■ To create another list, press [ Next Procedure ] [ Prev Procedure ] and go to Step 2.
7 .
	Select another procedure using [ Next Procedure ] or [ Prev Procedure ] or exit
	programming mode.

5-10Allowed Phone Number Lists (#407)