Lucent Technologies 4.1 manual Lines to Pools L08 2 Pool

Programming

To change the assignment of lines to pools:

1.Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 2 ] [ 0 ] [ 7 ].

2.Enter the first line to be programmed. For example, to program line 8, press

[ 0 ] [ 8 ]. A display similar to the following appears:

Lines to Pools L08 2 Pool 880

3.Enter the desired value (1–5)—see “Valid Entries” on the previous page.

4 . To program another line, press [ Next Item ] or [ Prev Item ] until the line number shows on the display. Then repeat Step 3.

5.Select another procedure or exit programming mode.

5-158Pool Line Assignment (#207)