Lucent Technologies 4.1 manual Doorphone Extension #604 and #605

Doorphone Extension (#604 and #605)

Description

These System Programming procedures identify extensions to which doorphones are connected. A doorphone is usually placed near an entrance, to screen visitors. You can connect up to two doorphones to the system—use Doorphone 1 Extension (#604) to identify the extension to which the first doorphone is connected and Doorphone 2 Extension (#605) to identify the extension to which the second doorphone is connected.

Related Features

■You must use Doorphone Alert Extensions (#606) to identify the extensions that signal when the doorphone button is pressed. Each doorphone can signal any number of alert extensions.

■To prevent outside calls from being made or received on the doorphone, use Line Assignment (#301) to remove all outside lines and/or Pool Extension Assignment (#314) to remove all pools from the doorphone extension. (Automatic Line Selection for the doorphone extension is automatically set to intercom first.)

■You can use Message Light On with the doorphone (for example, to turn on the doorphone’s light as a prearranged signal to a delivery person) provided the doorphone is connected to an R3.1 or later 206 module and the system is equipped with an R3.1 or later processor module.

Considerations

■An extension cannot be used for a doorphone and a hotline at the same time. However, hotlines and doorphones can have the same alert extensions.

■You cannot assign doorphones to extensions 10, 11, 16, 17, 22, 23, 28, 29, 34, 35, 40, 41, 46, 47, 52, and 53.

■Remove voice messaging system mailboxes from doorphone extensions.

■You cannot bridge two doorphones together.

Valid Entries

Extensions 12–15, 18–21, 24–27, 30–33, 36–39, 42–45, 48–51, 54–57

None assigned ✔

Programming

To program a doorphone extension:

1.Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 6 ] [ 0 ] [ 4 ] for doorphone 1 (or [ # ] [ 6 ] [ 0 ] [ 5 ] for doorphone 2).

2.Enter the doorphone extension number—for example, to identify extension 20

as a doorphone extension, press [ 2 ] [ 0 ]—or press [ Remove ] to unassign an existing doorphone extension.

3.Select another procedure or exit programming mode.

Doorphone Extension (#604 and #605) 5-81