Direct Line Pickup—Idle Line (I8LL)
Description
This feature allows users to access a specific outside line (where LL is a line number from
Related Features
■If a line is in use, users cannot access it with this feature (they hear busy tone). For information on accessing a ringing or held call, or joining a call in progress, see Direct Line
■If Line Access Restriction (#302) or Pool Access Restriction (#315) is set to No Access or In Only for a line assigned to an extension or lines within a pool, a user at the restricted extension hears busy tone if Direct Line Pickup is used to access that line to place a call.
Considerations
■This procedure applies to individual lines. If you have a pooled extension and you want to access lines in pools that are not assigned to your extension, dial the pool access code at intercom dial tone.
■You can program a Direct Line
Programming
To program a Direct Line
1.Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ Central Tel Program ].
2.Enter the number of the extension to be programmed with this feature.
3.Press a programmable button.
4.Press left [ Intercom ] [ 8 ].
5.Program another button for this extension or exit programming mode.
Using
System Phone
1.If you want, lift the handset.
2.Press the programmed button and dial the
If you did not Iift the handset, the speaker comes on automatically.
Standard Phone
1.Lift the handset.
You hear intercom dial tone.
2.Dial [ 8 ] and the
Direct Line |
