Lucent Technologies 4.1 manual 5554757

Valid Entries

Any phone number—up to 28 characters consisting of the digits 0–9, [ ★ ], [ # ], and special dialing functions that you can access by pressing [ Hold ] (Pause),

[ Mic/HFAI ] (Stop), [ Spkr ] (Recall), and [ Transfr ] (Touch-Tone Enable)—assigned to codes 600 through 699

No number assigned to any code ✔

Programming

To program System Speed Dial numbers:

1.At extension 10 or 11, press [ Feature ] [ 0 ] [ 0 ]. A display similar to the following appears:

PROGRAM EXTENSION 10

2.Select a three-digit code by pressing [ Feature ] and dialing three digits between 600 and 699. For example, to select code 600, press [ Feature ] [ 6 ] [ 0 ] [ 0 ].

If a number is assigned already to the code, the number appears on the display. If no number is assigned to the code, a display similar to the following appears:

Blank

3. Enter the number. For example, to program 555 4757, press [ 5 ] [ 5 ] [ 5 ] [ 4 ] [ 7 ] [ 5 ] [ 7 ]. The following display appears:

5554757

To mark the System Speed Dial number, precede the number by a [ ★ ]. For example, to mark the number 555 1001, press [ ★ ] [ 5 ] [ 5 ] [ 5 ] [ 1 ] [ 0 ] [ 0 ] [ 1 ]. The following display appears:

*5551001

4.At this point:

■To program another System Speed Dial number, start from Step 2.

■To program over an existing number, enter the new number after selecting the three-digit code.

■To remove a System Speed Dial number, enter the number’s three-digit code and press [ Mic/HFAI ] once.

5.Press [ Feature ] [ 0 ] [ 0 ] to exit programming mode.

System Speed Dial Numbers 5-183